So I moved, maybe 9 months ago, and disassembled my printer for easy packing. A few days ago I finished putting it back together, and tried starting it up today, the X and Z Axis move perfectly. But the Y axis will not move. I fully removed and re did ALL the wires of the printer, but still nothing. To see if it was the motors I unplugged them and plugged them into the Z Slot, they ran perfectly. After this I went through the wires themselves for the Y Motors, no holes or pin pricks, no bends or snags, finally I unplugged the Z Board end and moved it to the Y Board end, it moved perfectly.
If it isn't the motors, the wires, or the board, what has gone wrong??