Getting Started with OctoPi
Please follow these steps after downloading
1. Unzip the image and install the contained
.img file to an SD card like any other Raspberry Pi image.
2. Configure your WiFi connection by editing
octopi-network.txt on the root of the flashed card when using it like a thumb drive.
3. Boot the Pi from the card.
4. Log into your Pi via SSH (it is located at
octopi.local if your computer supports bonjour or the IP address assigned by your router), default username is “pi”, default password is “raspberry”. Change the password using the
passwd command and expand the filesystem of the SD card through the corresponding option when running
5. Access OctoPrint through
http://<your pi's ip address>.
Windows - win32diskimager to write image to sd card
Guide taken from and download available at: