I am stuck with the FT-6 firmware and need help! I have the SKR v1.3 board, with orange pi and LCD touch screen. It's got dual extruders with a single nozzle.
Octoprint boots up and after getting atom running and inverting the axes in the Marlin configuration.h file I got from the google drive (https://drive.google.com/drive/folders/1Hgw_Epqqu1d8rlY-aJTC1JQ6dAq4WdCZ) I was able to get the x, y, and z axes to home with the octoprint navigation on the touchscreen.
Now what I'm wondering is what I have to do to get the hot end and bed to heat up. The controls on octoprint don't do anything.
After triple checking my wiring against the setup guide, I'm assuming that something else (probably a lot more) in the configuration.h file for Marlin needs to be modified to get everything working and get a test print going.
Furthermore, Octoprint will timeout and disconnect from the printer after a couple of minutes, and the only way to get it to reconnect seems to be to reboot everything.
Any guidance is appreciated!