Hello, I'm new to the Folgers FT6 and have most things up and working. After getting everything together, I've started testing the movement and have run up against an issue. The control board thinks the build size is 200mmX200MMX250M or something similar. I've attempted to upload new firmware, and it does work but it still thinks it's a small printer. I've checked out many other topics that related to my problem, I've followed some, but end up back to where I started. Does anyone have the firmware.bin file for the FT6 with the BigTreeTech v1.3 with dual extruders I could get, or some direction on building my own? Marlin gets to the compiling part and then errors out with #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." As far as I'm aware LPC1768 is selected. Any suggestions would be great.